Additional Images
Polaris Ranger 900, XP, 900 crew, EPS, 2013-18 MCB performance upgraded Primary Drive Clutch replaces 1323130 1323103 & 1323308
Best replacement upgrade primary drive clutch Polaris Ranger 900, 1000 S Trail XP XP4 side by side UTV 2011-18
23431244
2013-18 Polaris Ranger 900, 900 crew, 900 XP, UE, Poland (all 2013-18 all options) primary drive clutch assembly fully calibrated. Replaces 1323130 1323103 & 1323308
Includes:
- 1 Fully assembled Primary Drive for Polaris Ranger 900, calibrated for your tire size, riding style, and elevation. (All prompted questions prior to checkout)
- 1 MCB Helpful hint clutch tuning instructions
Includes:
- 1 Fully assembled Primary Drive for Polaris Ranger 900, calibrated for your tire size, riding style, and elevation. (All prompted questions prior to checkout)
- 1 MCB Helpful hint clutch tuning instructions
Pricing:
$399.95
Description
MCB Polaris Ranger 900 primary drive clutch FOR ALL 2011-18 all models / options.
- Uses the same belt as your original clutch
- No secondary clutch changes needed
- Uses the same puller as your original clutch
If you are uncertain of your clutching issues and think you might also need a secondary clutch please look at our clutch combination kits that include both a Primary and a Secondary clutch.
Comes fully calibrated ready to mount. Customize if you have oversize tires by choosing the appropriate box / tire size. We can also custom tune your clutch for specific applications. Rock crawling where high speed is not a need. Deep mud only where all you want is lots of low end torque. High speed trail of seasonal road running where you'll be in the mid to higher RPM's most the time. We can custom tune for your needs. In all cases the clutch comes with some adjustability by adding or subtracting weights. This is easily done with no special tools. You do not even need to remove the primary spring, or even take the clutch off the machine for that matter. Additional weights and spring rates are available for those need wide variation in adjustability.
This clutch is our own design. It is a replica of the OEM Polaris primary except our clutch uses superior bushing material. Our open style billet faceplate allows for better cooling, more stable moveable sheave towers, prolonging spider puck wear. The faceplate bushing incorporates more surface area (diameter and height)and is a self lubricating brass oil impregnated material. Our weights are "bushed" unlike the factory and other aftermarket clutches that use steel on steel weights and pins. We use only the highest quality alloy materials for the sheaves and nitride coated tool steel on the main shaft and crankshaft mounting countersink area. The clutch is precision balanced. Our spider pucks are 100% PHENOLIC!
We calibrate each clutch that leaves here for 2-seater vs 4-seater, Tire size, elevation, and riding preferences, etc. (see prompts at checkout)
Uses the same puller as your original clutch
- Uses the same belt as your original clutch
- No secondary clutch changes needed
- Uses the same puller as your original clutch
If you are uncertain of your clutching issues and think you might also need a secondary clutch please look at our clutch combination kits that include both a Primary and a Secondary clutch.
Comes fully calibrated ready to mount. Customize if you have oversize tires by choosing the appropriate box / tire size. We can also custom tune your clutch for specific applications. Rock crawling where high speed is not a need. Deep mud only where all you want is lots of low end torque. High speed trail of seasonal road running where you'll be in the mid to higher RPM's most the time. We can custom tune for your needs. In all cases the clutch comes with some adjustability by adding or subtracting weights. This is easily done with no special tools. You do not even need to remove the primary spring, or even take the clutch off the machine for that matter. Additional weights and spring rates are available for those need wide variation in adjustability.
This clutch is our own design. It is a replica of the OEM Polaris primary except our clutch uses superior bushing material. Our open style billet faceplate allows for better cooling, more stable moveable sheave towers, prolonging spider puck wear. The faceplate bushing incorporates more surface area (diameter and height)and is a self lubricating brass oil impregnated material. Our weights are "bushed" unlike the factory and other aftermarket clutches that use steel on steel weights and pins. We use only the highest quality alloy materials for the sheaves and nitride coated tool steel on the main shaft and crankshaft mounting countersink area. The clutch is precision balanced. Our spider pucks are 100% PHENOLIC!
We calibrate each clutch that leaves here for 2-seater vs 4-seater, Tire size, elevation, and riding preferences, etc. (see prompts at checkout)
Uses the same puller as your original clutch
Details
- 23431244
- 23431244
- MCB
- New
Categories
Shipping Information
- Item Requires Shipping
- 10.0 lbs.
- W12.0000” x H12.0000” x L12.0000”
Customer Reviews
Total Reviews (0)
You must login to post a review.
Write the First Review!