Dalton clutch kit 2008-2011 Brute Force 750 EFI 4x4 DPSS-AQ

For Stock or over-sized tires to 27"
Adjustable for altitude and tire size

This Dalton Industries kit is designed specifically to fit the new style drive clutch on the '08 750 Brute Force with the wide bushing. Improved acceleration and back-shifting under load. Makes high range more useful at low speeds. Also offers flexibility to tune your clutch to rider preference and conditions. Two different primary springs are included to allow for preferred engagement RPM.

This kit incorporates the use of Dalton's patented Quick Adjust Cam Arms. This system allows adding or subtracting of the mass to the main body of the flyweights without removing the weights from the drive clutch. Quick adjust feature means you can have a preferred set up for stock tires, altitude, or over-sized tires quicker if you ride under varying circumstances or change tire sizes. No puller is required for most typical flyweight gram changes, as the base weight stays in the clutch during gram adjustment. Baseline set ups are included for most typical situations. The stock secondary spring on the 750 Brute is different than Prairie models and is sufficient for most trail applications for this tire size range and does not effect top speed (although it is well known that oversize tires DO hurt both acceleration and speed, proper clutch re-calibration can help recover from those losses). If you are running 28"or larger tires for mud application use part # DK 750 EBT or order optional secondary spring DPSS-AQ.

These kits are NOT for use on the Teryx utility vehicle. Do not assume it is a similar application because of similar engine size. The requirements of the cvt system are very different in that application. These kits will NOT fit the 05-07 model year 750 Brute Force.