Click on image to zoom

2012-15 Polaris 800 Piston kit Dragon Switchback Pro RMK fix it durability kit - FORGED

2012 2013 2014 2015 Polaris 800 Piston kit Dragon Switchback Pro RMK fix it durability kit

23428893
THIS KIT INCLUDES FORGED MCB DUAL RING PISTONS!

The stock 800 CFI motor runs a piston that is a total height of 2.885”. The stock piston to cylinder wall clearance on the CFI motor runs from .0070”-.0090”, this is considerably larger than the typical piston to cylinder wall clearance of most other water cooled two cycle engines of .0045”. The stock piston also has a considerably larger taper from bottom to top .0026”. These three main factors (short piston, larger piston to cylinder wall tolerance, and larger taper top to bottom) allows the piston to rock or slap within the cylinder. This results in premature ring wear, loss of compression and eventually piston skirt failure or cylinder skirt failure. The MCB fix it kit uses a piston that sets the piston to cylinder wall clearance at .0055”. It uses a piston that has significant less taper, and is .240” taller or 3.125” total height. These three factors eliminate the rock or slap described above, improving the reliability. Stock fuel mapping is as lean as it can be for emmissions. This causes “hot spots” in the fuel mapping and can cause the piston to swell, this is why we run the piston to cylinder wall clearance at .0055” instead of .0045”. We MCB recommend a slight fuel map change and the use of Ice Scratchers to optimize the cooling of the motor and eliminate the “hot spots” that can cause cold seizure like failures, especially if ran at the tighter tolerances other than what we MCB recommend.



TEAM MCB
Pricing: $519.95
Qty:

Details

  • 23428893
  • MCB
  • New

Categories

Shipping Information

  • Item Requires Shipping
  • $17.00

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.


May We Suggest



Share 2012-15 Polaris 800 Piston kit Dragon Switchback Pro RMK fix it durability kit - FORGED on Facebook